Posts

3 1/4″ Wide Engineered Tigerwood Installation – Serenata Beach

/in /by

Serenata Beach condo.This flooring improvement project for Dan’s Floor Store 904.887.8303 was for an upstairs condo in Serenata Beach, in Ponte Vedra Beach, Florida.

Following one of our FREE consultations, these homeowners chose an exotic 3 1/4″ wide engineered Tigerwood flooring by Triangulo and contracted our crew to install it.

After removing the old flooring, we leveled the concrete subfloor with quality Bostik SL-150.

This job was intricate because our crew cut the ends of the existing wood flooring square, then put in a header board across that flooring, and lined the new wood up to the old wood planks.

Next we glued down cork underlayment for the wood flooring, which was a requirement for sound deadening at this stacked condo.

And then our crew installed the engineered Tigerwood flooring, using durable Bostik GreenForce adhesive.

These homeowners told us they loved the look of their new Tigerwood flooring! And Dan’s Floor Store always likes to have happy clients!

Dan’s Floor Store sells and installs new wood floors (engineered wood, laminate, or solid wood), as well as vinyl and luxury vinyl plank floors, refinishes wooden staircases, and repairs and refinishes existing wood flooring for residential and commercial clients, to improve the looks of the floor and value of the property. Give us a call 904.887.8303 to make an appointment for a free consultation and estimate.

And if your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our sales representative or to make an appointment for a Free in-home consultation and estimate.

Engineered French Oak Plank Flooring Installed in Ponte Vedra Beach

/in , /by

A local new home builder contracted Dan’s Floor Store 904.887.8303 to install hardwood flooring in a project home under construction in Ponte Vedra Beach, on Ponte Vedra Boulevard.

We began by doing a large amount of leveling on the concrete slab and plywood sheet subfloors. Our crew always levels the subfloor prior to installing hardwood flooring.

The flooring selected for this project was 8″ wide x 9/16″ thick, engineered French Oak plank flooring from the Charleston collection; Cottonfield by Palmetto Road.

We covered 4,000 sq.ft. of floor with this engineered French Oak hardwood. For this project, our crew used Bostik Green Force adhesive . The flooring straps we use for the wide plank installations can be seen in some of the photos.

A picture framed fireplace, and a change of direction down the hall, leading to the master suite, were two highlights of the main French Oak flooring installation work.

We also installed the French Oak planks and nosing for a staircase.

What we considered to be the showpiece of this flooring project is in the bourbon room, where our crew made a special herringbone design with the French Oak flooring. To create the herringbone pattern, we made additional cuts on each plank, to make the extra tongues and grooves needed for a solid wood floor.

Our clients and builder were thrilled with our work and the outcome. And Dan’s Floor Store always likes to have happy clients and builders.

Dan’s Floor Store sells and installs new wood floors (engineered wood, laminate, or solid wood), as well as vinyl and luxury vinyl plank floors, refinishes wooden staircases, and repairs and refinishes existing wood flooring for residential and commercial clients, to improve the looks of the floor and value of the property. Give us a call 904.887.8303 to make an appointment for a free consultation and estimate.

And if your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our sales representative or to make an appointment for a Free in-home consultation and estimate.

Caribbean Rosewood Flooring and Porcelain Tile Install in Eagle Harbor

/in , /by

Caribbean rosewood flooring and Emser tiled foyerDan’s Floor Store 904.887.8303 was contracted to do the flooring work in a whole home renovation in the Eagle Harbor community of Fleming Island, Florida.

Our work began by removal of all of the carpeting and sheet vinyl that had been installed in the home. Next we did a lot of leveling of the concrete subfloor, to prepare it for the wood flooring and porcelain tile installation. Our clients chose engineered 3″ wide Caribbean Rosewood flooring by Tesoro Woods to replace their old carpeting. Our crew installed the Caribbean Rosewood flooring in the hallway, main living room, both bedrooms, and closets.

And they chose 12″ x 24″ porcelain tile in the Homestead cream pattern by Emser tile to replace the sheet vinyl flooring. We installed tile in the foyer, the kitchen / dining room, 2 bathrooms, and the laundry room.

Our clients told us that they loved the look of their new wood and tile floors! And Dan’s Floor Store always likes to have happy clients!

Dan’s Floor Store installs new wood floors (engineered wood, laminate, or solid wood), and install tile and stone on floors and walls, too!

We also install vinyl and luxury vinyl plank floors, refinish wooden staircases, and repair and refinish existing wood flooring for residential and commercial clients, to improve the looks of the floor and value of the property.

Give us a call 904.887.8303 to make an appointment for a free consultation and estimate.

– – Get the quality and the look you want, with friendly service and reasonable prices. – –

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our sales representative or to make an appointment for a Free in-home consultation and estimate.

Engineered Hickory Hardwood Flooring Installation near St. Augustine

/in /by

Dan's Floor Store showroom, Ponte Vedra, FloridaAfter a flood in the kitchen ruined their wood flooring, these homeowners called Dan’s Floor Store 904.887.8303 for a free consultation and estimate.

This wood flooring home improvement project took place in a home in Elkton Florida, just west of Saint Augustine, and off of County Road 207.

As part of the job, we were asked to remove the existing, water damaged wood flooring.

The whole 1,120 sq ft of existing wood flooring was removed by our crew in one day,

The next day we leveled the concrete slab.

And the next day, our crew started installing our clients’ new wood flooring.

 

Our clients had chosen an engineered Hickory hardwood flooring from the Villa Bocelli collection by Bella Cera in the Storico color.

This hardwood flooring comes in random widths and lengths, with a lot of variation in color and shade. Also this flooring is very unique with the saw marks against the grain of the wood. The semi-rough texture will help reduce visiblity of scratches.

We used Bostik’s Pro Cure adhesive to install this engineered Hickory hardwood flooring.

Instead of a t-mold at the tile, our crew used a header board, at our customer’s request.

All in all, our customers were very happy. They even wrote us a very nice Review. And Dan’s Floor Store likes to have happy customers!

Dan’s Floor Store installs new wood floors (engineered wood, laminate, or solid wood), as well as vinyl and luxury vinyl plank floors, refinishes wooden staircases, and repairs and refinishes existing wood flooring for residential and commercial clients, to improve the looks of the floor and value of the property. Give us a call 904.887.8303 to make an appointment for a free consultation and estimate.

And if your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

Engineered French Oak Flooring & Treads – Plantation Golf & Country Club PVB

/in , /by

Front view of the project home - Engineered French Oak flooring and stair tread installationDan’s Floor Store was contracted to install engineered French Oak flooring and stair treads in a new construction home in the Plantation Golf & Country Club community of Ponte Vedra Beach.
Boy, from this photo (taken when we went back for more photos) this is becoming such a beautiful home!

Our client selected 8″ wide, engineered French Oak flooring, from Bella Cera‘s Villa Borghese collection.

We began by leveling the concrete slab subfloor on the first level. We had to use a large amount of floor leveler to get the concrete slab ready for our wood flooring. Upstairs, our crew went from room to room, sanding all of the plywood subfloor seams to achieve a level surface.

Then we installed 4,000 square feet of the hardwood French Oak flooring. We used flooring straps when installing this French Oak wood flooring, because of the width of the flooring planks.

Our crew also did the staircase, including two landings and 21 treads in the same French Oak flooring, using nosing and flooring for the stair treads. In all, this project took several weeks to complete

The new flooring and stair treads were covered for protection while the rest of the construction work finished.

We returned to the home several weeks later, when the construction work was completed, and our new flooring and stair treads were unveiled. Everything looked great, so we got some more photos of this wood flooring and stairs project.

 

 

Our client was very pleased with our work, and Dan’s Floor Store always likes to have happy clients!

Dan’s Floor Store installs new wood floors (engineered wood, laminate, or solid wood), as well as vinyl and luxury vinyl plank floors, refinishes wooden staircases, and repairs and refinishes existing wood flooring for residential and commercial clients, to improve the looks of the floor and value of the property. Give us a call 904.887.8303 to make an appointment for a free consultation and estimate.

And if your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

Sand and Finish Red Oak Wood Flooring – Ponte Vedra Beach

/in /by

The new buyers of a home in Ponte Vedra Beach called Dan’s Floor Store 904.887.8303 to for a free consultation.

Someone had previously applied stain over the top of the engineered, rotary peeled  Red Oak wood flooring in the home. The new owners thought the flooring looked really hideous, and they called Dan the Floor Man to come rescue them. After our consultation, the owners contracted our Store to sand, stain, and refinish their engineered Red Oak wood flooring.

Here are some photos of the existing Red Oak flooring:

Our crew started by sanding the engineered Red Oak wood flooring down to bare wood (as can be seen in the following photos).

Then we applied Bona Graphite stain. The transformation was beautiful!

After the stain was applied our crew applied three coats of Pallmann power ultra matte waterborne finish. This sand, stain, and finish job turned out exquisite!

Our clients were thrilled with the look of the refinished engineered, rotary peeled Red Oak wood flooring in their new home, and Dan’s Floor Store always likes to have happy clients!

Dan’s Floor Store sands and finishes wood floors, repairs and refinishes existing wood flooring and staircases, and installs new wood floors (solid wood, engineered wood, or laminate) for residential and commercial clients. Our work improves the looks of the floor and value of the property. Give us a call 904.887.8303 to make an appointment for a free consultation and estimate.

If your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

Engineered Maple Flooring Replacing Tile – Palencia

/in /by

Palencia Golf and Country Club community homeowners called Dan’s Floor Store for our free consultation and estimate. They wanted to replace 1600 square feet of tile flooring that had been originally installed in their home with wood flooring. Home improvements can often improve the value of a home, as well as make it more enjoyable for the owners.

Maple flooring installedOur clients chose an engineered maple flooring made by Mirage; 6 1/4″ X 1/2″called Maple Peppermint, it has a grey color and is a very beautiful flooring.

Mirage is one of the best brands of engineered wood flooring in the industry. It is FSC certified wood flooring. The FSC stamp is the hardest stamp to get on wood flooring, because FSC is the Forestry Stewardship Council. That means that all of the wood comprised in the Mirage engineering wood flooring is eco sound and compliant to the highest standards.

Our crew had a lot of floor tile to remove. We put plastic film over cabinets and appliances, to protect them during tile removal.

Then we leveled the concrete slab sub floor. A level surface helps wood flooring last longer.

After leveling the slab we also had to seal the concrete with Bostik’s MVP (Moisture Vapor Protection) prior to installation. Sealer was required because the slab had tile put on it before it was fully cured. Not letting the concrete slab cure before installing tile traps the moisture between slab and tile. Dan’s Floor Store understands how this trapped moisture can penetrate and damage new wood flooring. It is our practice to check every concrete slab for trapped moisture prior to installation.

With the sub floor leveled, the installation of the engineered maple flooring progressed smoothly.

Needless to say this maple flooring job turned out really beautiful! Our clients were very pleased with the new look that the maple wood floors gave their home. And Dan’s Floor Store likes having happy clients!

New wood floors (whether solid wood, engineered wood, or laminate), or refinishing the wood flooring in your home or business office will improve it’s looks and value. Give Dan’s Floor Store a call 904.887.8303 to make an appointment for a free consultation and estimate.

If your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

Beachy Look White Oak Flooring Installation – St. Augustine

/in /by

Dan’s Floor Store was called by a previous client living in Davis Shores in St. Augustine, Florida to install some new wood flooring. We had refinished his wood floors, sanding and staining them during our prior visit. Then Hurricane Matthew came through and the floors in his home ended up under 17 inches of water!

His old flooring had to be removed along with the subfloor, drywall, doors and baseboards. All are new because of the hurricane’s water damage.

Beachy look White Oak flooring being installedFor his new wood flooring , our client selected an engineered wood flooring product made by Real Wood Floors, the Vintage Loft collection, color name Foundry.

  • These are 8 1/2inches wide by 5/8inches thick random length planks, up to 7 feet long with 80 percent of lengths to be long boards.
  • It also boasts a 4mm top and has a distinctive look with lines against the grain to add to the already wire brushed texture on this White Oak flooring.

Dan’s Floor Store crew prepared the new plywood subfloor by edging down the seams of the plywood sheets. The edged seams makes it possible for the new wood flooring to lay flat across subfloor. You can see the edged subfloor sheets in in some of the project photos.

We used Bostik’s GreenForce adhesive, a Zero VOC (Volatile Organic Compounds) adhesive, for this job.

Dan’s Floor Store uses special flooring straps to hold these White Oak wood planks together during installation, due to the width of the planks.

The White Oak wood flooring in the Foundry color shows shades of grey, silver, and black, to exemplify a beachy modern flooring look.

Our client was very pleased with their new beachy look white oak wood floors. We are glad to have clients that like our work. Many of our previous clients recommend us to their family and friends for wood floor installations, wood floor refinishing, and tile and stone work. Always nice to have clients who appreciate your work and introduce more potential clients to you.

New wood floors (whether solid wood, engineered wood, or laminate), or refinishing the wood flooring in your home or business office will improve it’s looks and value. Give Dan’s Floor Store a call 904.887.8303 to make an appointment for a free consultation and estimate.

If your next improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

Oak Hardwood Flooring Installation in St. Augustine

/in /by

Jacksonville, Ponte Vedra, St. Augustine; we live so near the Atlantic Ocean, we often get requests for ideas to give a home or office a beachy look with new wood flooring.

Dan’s Floor Store delivers!

Oak hardwood flooring installed (detail)This client selected 9/16″ thick by 4 3/4″ wide engineered Oak Hardwood flooring in the matted style of the Urban Floor Columbus collection for their condo in the Villages of Vilano in St. Augustine. This Oak wood flooring look is redefining the relaxed, beachy look with taupy gray colors.

First we cleaned and leveled the subfloor. You can see that there was a lot of leveling for this wood floor installation. Leveling the subfloor is important to protect the wood flooring from flexing damage after installation.

Then we installed the new Oak wood flooring, using Bostik Vapor-Lock adhesive, which provides moisture control and sound reduction qualities in addition to holding the wood flooring planks in place. We selected the Bostik Vapor Lock adhesive for this wood floor installation because sound reduction is a good quality to add in a condo.

Our client was excited and happy when they saw how nice this new Oak wood floor looked. And Dan’s Floor Store always likes to have happy clients.

If you are thinking about new wood floors (whether solid wood, engineered wood, or laminate), or refinishing the wood flooring you have, give Dan’s Floor Store a call 904.887.8303 to make an appointment for a free consultation and estimate. If your next home improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

Install Sand and Finish White Oak Wood Flooring in Ponte Vedra Beach

/in , /by

During one of our free consultations about wood flooring for a home in Ponte Vedra Beach, the homeowners shared that they really liked White Oak flooring with a deep, natural tone.

We can do that! We found them some beautiful 5/8″thick x 4″ wide, unfinished engineered White Oak Premium grade wood flooring, made by Shamrock Plank Flooring.

First we leveled the subfloor.

We installed the unfinished engineered White Oak Premium grade wood flooring with Bostik Greenforce adhesive. We used wood flooring straps to hold the wood planks together during installation.

Dan’s Floor Store also installed matching solid White Oak Select stair treads. This photo shows the stairway prior to our installation of the new treads.

We sanded the new White Oak Premium grade wood flooring and stair treads.

The new White Oak wood flooring and stair treads were finished in natural, Bona waterborne finish:

  • First coat of Bona IntenseSeal for a vibrant look and deep, natural tone
  • Final two coats of Bona Traffic Satin;  a 100% polyurethane, premium finish for durability and beauty

Our clients said their new wood flooring and stair treads look great, and we always like to have happy clients.

If you are thinking about new wood floors (whether solid wood, engineered wood, or laminate), or refinishing the wood flooring you have, give Dan’s Floor Store a call 904.887.8303 to make an appointment for a free consultation and estimate. If your next home improvement project involves tile or stone work, don’t forget that we professionally install those materials too.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.