Screening and Recoating Wood Floors and Stairs in Epping Forest

Beautiful Wood Floor after screening and re-coatingDan’s Floor Store was called to an elegant two story home in Epping Forest, for one of our Free consultations. We were asked if their 2,300 square feet of wood flooring should be refinished or replaced.

After inspecting the floors with the clients, we recommended a process called Screening and Recoating, a refinishing procedure for wood flooring that helps it last even longer. Based on our recommendation, the client asked us to also refinish the stair treads, for a refreshed look through their home.

From our experience, the finish on most wood floors has been scuffed by normal use after 3 to 5 years. Our Screening and Re-coating process restores the finish to like new, to last another 3 to 5 years.

The “Screening” process sands the wood flooring with clog-resistant sanding disks, removing the wood floor finish without cutting into the wood itself. Most commonly, a wood floor with a polyurethane finish coating is an excellent candidate for screening, because the polyurethane creates a non-penetrating plastic coating that actually sits on top of the wood flooring. We see better results when we screen a wood floor with a finish that is worn, scratched or dull but the wood beneath is not stained or damaged.

This photo is of the wood flooring in an area of the home before Screening.

The same wood flooring area after Screening.

The same wood flooring area during the Coating process.

Several photos of the Screened and Recoated wood stairs and floors.

The Screened and Recoated wood floors looked great and our clients were very pleased to see the results. We enjoy helping clients save some money while extending the life of their wood flooring.

Get the quality and the look you want, with friendly service and reasonable prices.

  • Visit our Ponte Vedra, Florida showroom.
  • Call Dan directly at (904) 887-8303.
  • Call the store at (904) 825-2311 to speak with our salesman or to make an appointment for a Free in-home consultation and estimate.

White Oak Wood Flooring Installation – Amelia Island Plantation

View of unfinished solid oak flooring installedA couple called us out to add some new solid wood flooring in their home in Amelia Island Plantation. Their home already has about 1000 sq.ft. of existing original White Oak Select solid wood flooring.

Dan’s Floor Store is adding 300 sq.ft. (a project that we call a “New Install”) of solid, unfinished White Oak Select with 4 solid wood, White Oak treads and a nosing, from Shamrock Plank Floors, to an elevated living room.

After an installation of unfinished wood flooring, the new flooring (and the existing 1000 sq. ft. of flooring) needs to be sanded and then finished, to seal it from dirt and wear. The client can pick from a wide variety of stains and coatings for the flooring decor they want in their home (or office, for commercial flooring installations).

Our client has already picked the stain and coating they want, so this job is going to be sanded and finished soon.

We finished this project but we lost the finished photos. Darn!

Take a look at these other wood floor refinishing and stair refinishing projects we’ve completed to see results that make clients happy

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Oak Wood Stair Refinishing in Atlantic Beach

Solid Oak wood stair treads refinished to match Maple wood flooring in Atlantic Beach, FloridaThe owners of a home in Atlantic Beach, Florida contracted Dan’s Floor Store to sand and refinish the solid Oak wood stair treads in their home to match the color of their beautiful solid Maple wood floors.

We have over 15 years of wood floor refinishing. Some refinishing projects are larger, with hundreds of square feet of flooring being sanded, stained, and finished for our clients. Some projects are smaller in area (such as this wood stair refinishing project), but require application of the same refinishing techniques. Read How Dan’s Floor Store Refinishes and Restores Wood Floors.

After sanding the Oak wood stair treads to prepare them for refinishing, part of the challenge of this particular project was matching different species Maple versus Oak. We needed to match the wood color of the solid Oak treads to the color of the existing solid Maple wood flooring.

It took some time and several tries to get the tone of the stair treads to match but we did it!  We used a little bit of dark Walnut ebony and white stain to create a continuous shade of wood in the flooring and stairs, throughout their home. Our clients were very happy with their refinished wood stairs!

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Red Oak Flooring Refinish in Englewood

Grand old solid Red Oak floor after refinishingThe homeowners of an early 20th century home in the Englewood neighborhood of Jacksonville, Florida called Dan’s Floor Store for a free consultation about the old Red Oak flooring in their home.

  • They wanted to know if the flooring could be refinished, or needed to be replaced.

We found that the house had some very old solid Red Oak wood flooring, which had accumulated numerous water stains and pet urine stains, along with years of wear. (Some of the stains are visible in the before refinishing photos.) Most of this Red Oak flooring could be refinished, but some flooring was damaged so badly that it had to be replaced with solid wood flooring planks.

Next we sanded the whole floor, to prepare the wood for staining and finishing.

Discussing the project with our clients, we concluded that for this job we would need to use the technique of applying water to “pop” the grain of the wood, prior to applying the stain.

  • From our experience, this extra step allows the stain to penetrate deeper, creating a deeper, darker tone.

After “water pop”, staining, and finishing, these grand old solid Red Oak floors look good and are ready for years of service for our clients.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Refinishing Fine Old Wood Floors in Historic Riverside

Refinished, beautiful solid hardwood floors in RiversideDan’s Floor Store was called to refinish the impressive old wood floors in one of the beautiful historic homes in the Riverside neighborhood of Jacksonville, Florida.

 

This grand old house had some beautiful wood floors that just needed to be refinished to be enjoyed.

  • There are rift and quarter sawn solid White Oak flooring with Walnut feature strips in the common areas of the home.

 

  • The flooring to be refinished in the two bedrooms are of solid antique Heart Pine.

Showing how "Water Pop" darkens the effect of stain on the hardwood flooringAfter discussing the project with our clients, from our experience we concluded that for this job we would need to “pop” the grain of the wood with water prior to applying the stain.

This extra step allowed the stain to penetrate deeper, creating a deeper, darker tone.

This photo shows the same stain (dark walnut) on both samples, the darker one has been water popped which can definitely produce a deeper, darker color.

 

 

After sanding, these elegant solid hardwood floors were ready for staining and finishing. You can see the designs in the quartersawn solid White Oak hardwood flooring with rift-in Walnut feature strips better after sanding the floor, to prepare for refinishing.

During the coating and finishing part of the project, these elegant floors seem to shimmer.

The following photos show the beautiful results of professional refinishing on the old wood floors in this historic Riverside home. Durable, solid hardwood flooring that will last for years.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

New Hardwood Floors and Refinishing in Epping Forest

Dan’s Floor Store was invited to help a couple improve the hardwood floors of their home in the Epping Forest neighborhood of Jacksonville, Florida.

Part of the project was to install 900 square feet of new, unfinished solid Red Oak select hardwood flooring from Shamrock Plank Flooring (2 1/4″ x 3/4″), which then had to be sanded, stained, and finished (with three coats of polyurethane for a beautiful, durable protective finish). For best results, we allowed the newly installed wood flooring to acclimate for about a month and a half before sanding, staining, and finishing it.

There was also also a set of stairs and 2300 square feet of existing hardwood floors downstairs that needed to be refinished – sanded (“screened”) and then coated with one coat of Bona Traffic Satin polyurethane finish.

As part of this project, to get the effect the clients wanted, we needed to use the refinishing technique of “popping” the grain of the wood with water prior to applying the stain. Then we applied a stain color of antique brown, which resulted in a perfect color match to downstairs wood!

Here are some close up of the edge work on these elegant, solid Red Oak hardwood floors.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Wood Floor Refinishing near San Marco

Refinished solid wood flooring near San MarcoA couple who had been a client of our Dan’s Floor Store previously called us to their home, off old San Jose boulevard, near historic San Marco neighborhood of Jacksonville, Florida, to talk about refinishing more of their wood flooring.

We have been refinishing wood floors in homes and businesses on the First Coast area for over 15 years. Wood floor refinishing restores older floors with a durable finish that will last for years, and the clients can have their floors stained to achieve a different look during the process. Read more about How Dan’s Floor Store refinishes wood floors.

In our previous work, we had sanded and finished half of the wood flooring in their house and stained it a medium brown color.

Since the couple were taking a vacation, they asked if we could refinish the other thousand square feet of their residence while they were away. And so we did. First we prepared the rest of the worn wood flooring by sanding it, and then we stained it in the same exact color as the previous work, so there was the look of smooth continuity throughout their house.

Now the wood floors throughout the home have been restored to look like new again!

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Screening and Re-coating Wood Flooring in Sawgrass Country Club

Screening and Re-coating is a wood floor maintenance procedure that helps wood flooring last even longer.

Screening and Re-coating a Wood Floor in Sawgrass Country ClubFor most wood floors, after 3 to 5 years, the finish has been scuffed by normal use, and our Screening and Re-coating process will restore the finish to like new, to last another 3 to 5 years.

“Screening” (sanding with clog-resistant sanding disks) removes the wood floor finish without cutting into the wood itself. Most commonly, a wood floor with a polyurethane finish coating is an excellent candidate for screening, because polyurethane creates a non-penetrating plastic coating that sits on top of the wood flooring. We see better results when we screen a wood floor with a finish that is worn, scratched or dull but the wood beneath is not stained or damaged.

About 5 years ago, Dan’s Floor Store installed wood flooring in this home in the Sawgrass Country Club neighborhood. The client consulted Dan, asking what to do because the finish on their floors had become worn and scratched. They were thinking the wood flooring would need to be replaced. After we inspected their wood flooring, the client was very happy to learn that the floors could be screened and re-coated for a fraction of the cost (and time) of replacing their wood floors.

The client’s wood floors of both plank and parquet Red Oak flooring, with Early American stain by Minwax, turned out great. The client was very happy to see how nice their finished floors looked. Nice to be able to save the client some money while extending the life of their wood flooring.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Home Improvements in Stages – New Engineered Wood Flooring in Mandarin

About two years ago, we installed some new wood flooring in a home in Mandarin. Our clients enjoyed their wood floors, and this year invited us back to install engineered wood flooring in two more rooms.

New Engineered Wood Floor in kitchen, in home in Mandarin.We enjoy helping our clients achieve their home improvement goals.

Sometimes making home improvements such as adding wood flooring, or tile projects, or even refinishing an existing wood floor, in stages, over time, makes more sense for clients.

Many of our clients have been able to enjoy completing more upgrades to their homes by accomplishing them in stages, which allows them to stay within their household budgets.

This time the new engineered wood flooring installation project presented more opportunities for use of our flooring skills and experience:

  • The two rooms having new engineered wood flooring installed were not connected. There is a bathroom with a tiled floor between the two rooms getting new wood flooring.
  • The hallway between the project rooms was already finished in wood flooring.  To create a seamless look in the wood floors, we did what we refer to as a weave-in repair with the wood planks at each of the doorways.
  • Getting a level surface for installing the new wood flooring on this project was also interesting, because there were transitions from concrete subfloors to plywood subfloors in this part of the home.

The new wood flooring is Forest Accents’ Timeless Textures line, in Maple Tawny, and it looks great in our clients’ home, and we are happy to help them reach their home improvement goals.

Had to replace tile on the face of the riser of this step, to match the adjacent wood flooring/

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Flood Water Flooring Replacement in south Jacksonville Beach

New Wide Plank, Hand Rubbed, Distressed, Engineered Wood FlooringThis flood water flooring replacement project began with a call from a repeat client, whose home in south Jacksonville Beach had been flooded; both wood flooring and tile flooring in the home had been damaged by the accidental flooding and had to be replaced.

Dan’s Floor Store is experienced working flooring restoration projects like this, with home owners and their insurance companies.

We began this project by removing the damaged tile and wood flooring.

Once all the tile and wood flooring were removed floor leveling was done and we could begin installing! The client chose LM Flooring – St Laurent European Oak 7 1/4″ wide by 1/2″ thick for this project. New baseboards and shoe molding were provided and also installed.

The client was thankful to get the damaged flooring and tile in their home replaced. They were very pleased with their new floors, and are able to enjoy living in their home again.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.