Cupped Wood Floor Refinishing Project in Mandarin

Severely cupped wood floor, before refinishingWe were asked to look at a wood floor in the Beauclerc community, in the Mandarin area of Jacksonville, Florida, that exhibited severe cupping. We took this photo of the client’s severly cupped floor, prior to refinishing.

A cupped wood floor occurs when flooring absorbs excessive moisture on the underside of the flooring planks, causing expansion and cupping, with the edges of the planks raised. Moisture can also cause wood flooring to exhibit a condition called crowning, in which the outer edges of the wood planks shrink and become lower than the middle of each plank. Dan’s Floor Store can refinish wood floors with either condition. A worn wood floor may be able to be refinished, and damaged wood floors can be repaired for beautiful results.

This was a prefinished aluminum oxide finished floor that was severely cupped. The repair areas (new wood) were filled in upon our arrival. Since the floor had a severe cup to it, we had to cross sand the floor a total of five times on alternating 45 degree angles to the grain of the wood, in order to achieve a flat floor surface.

We continued our refinishing process with rough and fine sanding (with the grain of the wood), then scraped corners and buffed, in preparation for a MinWax Golden Oak stain.

 

After the stain had dried, we applied 3 coats of polyurethane finish. Our client was very happy to see the results of our refinishing procedure.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Wood Floor Refinishing project in San Marco

Solid Red Oak Wood Floor - San Marco - afterRecently Dan’s Floor Store was asked to refinish some old wood floors in the beautiful, historic San Marco neighborhood, here in Jacksonville, Florida.

These solid Red Oak wood floors had been exposed to decades of wear and abuse. You can see the indentation, scratches, and worn finish in these pre-refinishing photos.

After a thorough inspection of the client’s wood flooring, we told the client that we could refinish these floors so they could enjoy them for years and years ahead.

Their solid wood flooring had not been damaged to the degree that we recommended replacement.

Dan and the client looked through our samples of recommended quality wood stains and finishes, and agreed which ones would fit the decor of their home and hold up for the foot traffic planned for these rooms. A Minwax Honey stain was selected, with a polyurethane finish.

We followed our Dan’s Floor Store Quality Wood Floor Refinishing process. Our wood floor refinishing project made these rooms unavailable to the client for a total of 7 days, during which we were actually in their home 4 work days. (The additional project time was required to allow the stain and the finish to completely dry.)

We appreciate being able to restore floors like this to better-than-new appearance, giving our clients beautiful flooring for their homes and businesses.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.

Wood Flooring Project in Sawgrass Country Club

After new hard surface wood flooring was installedDan’s Floor Store recently completed a multi-room engineered wood flooring installation project in a home at the Sawgrass Country Club, in Ponte Vedra, Florida.

This was one of our larger scale projects, covering approximately 1,500 ft.² in various rooms.

The project began with removal of the old, worn, contractor grade carpeting, and existing tile flooring, including removal of the baseboards in each room to receive new flooring. We often remove baseboards when replacing flooring, because it saves time for our crew, getting us out of the client’s home or office faster (and giving the client the privacy of their property, once more).

The next phase of the project was floor leveling, and this home required quite a bit. Floor leveling is very important in preparation for installation of new flooring. Unlevel floors can cause hard surface flooring to crack, reducing the life of the new flooring and requiring replacement of sections of your new flooring.

Then we installed a new engineered birch wood flooring made by Urban Floor. The client selected a pattern that is 5″ wide by 1/2″ thick, dark in color, with the descriptive name, “Birch Black Tea“, from their “Welcome Home” series.

The whole project took about a week, mostly because of the amount of leveling that was required.

Following the installation of the new flooring, we upgraded these rooms of the client’s home with an impressive 5 1/4″ tall baseboard, and shoe molding for a nice finishing touch in trim work.

Get the quality and the look you want, with friendly service and reasonable prices.
Visit our Ponte Vedra, Florida showroom.
Call Dan directly at (904) 887-8303.
Call the store at (904) 825-2311 to speak with our salesman
or to make an appointment for a Free in-home consultation and estimate.